DTF TRANSFERS ZONE

DTF Transfers Gang Sheet

DTF Transfers Roll

UPLOAD DTF PNG FILE

HOW TO GIVE ORDER?

  1. Your png file must be at least 300 PPI resolution.
  2. Prepare your order from Adobe Illustrator or other software. (Make sure it’s 22″ Wide)
  3. Save documents in PNG format with TRANSPARENT BACKGROUND.
  4. Chose Height size from drop down menu. ( If you order more than 180″ inches; For example, 240″ inches; separate them 180 ” and 60″ inches and add to cart both of them)
  5. Make sure your file requirements are correct
  6. Upload files at DTF TRANSFERS ROLL page.
  7. Proceed to Checkout.

Texas Customers ONLY Please Email Us Your Tax Exempt To Have Your Account Exempt From Sales Tax Before Making Any Orders.

If you have problem while uploading your file, please go to our other website (oreletprint.com) and give your order from there.

$5.00$80.00

Texas Customers ONLY Please Email Us Your Tax Exempt To Have Your Account Exempt From Sales Tax Before Making Any Orders.

File Format
PNG, high quality only with Transparent Background

Resolution
300DPI Upload
White Under-base
We Do Not Recommend Any Artwork With Super Tiny Details That Are Below The 9PT Mark it will NOT get Unsderbased And it Will Most Likely Not Get Transferred Correctly Onto The Garment/Fabric (How to fix the issue) Simply add a stroke to your design to make the tiny details a bit thicker before submitting the artwork for printing. below is a picture showing the issue.

Transparency
Transparent or translucent gradient IS NOT recommended, it will lose it “blending” effect where transparency of 30-40% will start to break and create jaggy edges in your artwork because the printer will lay white under them thinking there is color there creating an effect like the one below.(How to fix the issue) Make the gradient more solid or remove it completely from the design.

Edge Quality
Check your artwork edge quality and make sure they are sharp enough and does NOT contain “dirty” colors resulted from badly removed background process. How to check the quality of the edges simply zoom in at 100% and if it looks like the image on the top the output will be like the image on the bottom.(How to fix the issue) You will need a higher resolution image or get the design vectorized by a designer.

DTF PRESSING INSTRUCTIONS

Cotton Fabrics 310°f-320°f Degrees Fahrenheit
Polyester Fabrics 250°f-260°f Degrees Fahrenheit
High Pressure
Time: Press Once For 8-10 Seconds And Wait For 15 Seconds For Cooling, Then Do Hot Peel The Dtf Film
For Better Feeling On Fabrics Re-press 3 Seconds With Teflon Sheet After Hot Peeling
Troubleshooting
Please Make Sure The Heat Press Is Calibrated Before Starting Production
And That The Temperature On The Digital Display Matches The Heating Element With A Temp Gun

Refund & Exchange Policy

DTF Transfers Zone does not accept any exchange or refund orders that caused by any kind of problems of customers.

Copyrights
Make sure you own the copyrights to print, otherwise DTF TRANSFERS ZONE is not responsible for any consequences.